Hurricane prep for equipment fleets in Florida: what our yard does every June

June 1 marks the start of Atlantic hurricane season, and every Florida equipment owner should have a plan that goes beyond “park it on high ground.” At our Hilliard yard, we run a checklist every May that covers fuel, fluid levels, battery condition, and staging protocol. Machines listed on https://equipmentsupplyservice.com are stored with these preparations already in place.

Fuel and fluids: full tanks before the forecast

When a storm threatens, fuel becomes scarce fast. We keep diesel tanks topped off for all yard inventory starting in June. A full fuel tank also prevents condensation inside the tank — a common issue when machines sit during evacuations. Hydraulic fluid, engine oil, and coolant should all be at proper levels. If a machine needs an oil change within 50 hours, do it before the storm — you may be running that machine hard for debris clearing with no access to a parts store for days.

Battery and electrical

Dead batteries after a storm are one of the most common fleet problems. If a machine sits for a week during evacuation and prep, a marginal battery will die. We load-test every battery in May and replace anything that tests below 80% capacity. Solar trickle chargers on the yard help, but the only real solution is good batteries. Mark the install date on every battery with a paint pen — if it is more than three years old, replace it proactively.

Post-storm deployment

After a hurricane, the first 72 hours create enormous demand for equipment — loaders for debris, excavators for drainage, and skid steers for residential cleanup. If your machines are prepared and operational, you can mobilize immediately while competitors are still jump-starting dead equipment. We have seen storms turn into significant business opportunities for prepared operators. Browse equipment at https://equipmentsupplyservice.com before the season — pre-storm pricing beats post-storm scarcity pricing every time.